Application
Shipped within 5 business days
A sliding door brings plenty of natural daylight into your home and creates an open connection with your garden. However, during summer it also lets in a lot of heat. Because of the large glass surface, the temperature in your living room can rise quickly. Good sun shading for your sliding patio doors is therefore essential.
Traditional sun shading for large sliding doors is often expensive or requires permanent installation. By using a sun screen with suction cups, you can mount the screen directly onto the glass, simple, affordable and without drilling or screws.
Sliding doors require a flexible solution that works with both the size and daily use of the door.
This is why you choose Sun Eclipse for your sliding doors:
*Important: Our suction cups are 3.5 cm high. Please check in advance whether your sliding door can still fully open when the Sun Eclipse screen is installed. If you take this into account, it is an ideal solution for effective heat protection without drilling or screws.
Not enough space to install the screen on the outside? You can also mount the Sun Eclipse screen on the inside of the glass.
Sun screens for sliding doors can be installed on either the outside or the inside of the glass. When mounted outside, sunlight is blocked before the glass heats up. This is the most effective way to keep heat out.
If exterior installation is difficult or less practical for your sliding doors, interior installation offers a safe and accessible alternative. You can easily mount the screens from inside your home while still noticeably reducing the temperature in your living room.
For your sliding doors you can choose between two variants, depending on how much light and heat you want to block.
Best choise
for interior installation
Choose the colour that best matches your window frame. We supply matching caps in the same colour as your screen. All colours are suitable for outdoor use.
Inside and outside
Inside and outside
Outside
Outside
Outside
Our sun screens with suction cups are specially designed for large glass surfaces such as sliding doors. The screens are fully custom-made so they fit perfectly onto the glass of your sliding door.
You can easily mount the sun screens directly onto the glass without drilling, screws or permanent installation. Both interior and exterior installation are possible, depending on your situation. When installing outside, make sure there is enough space between the sliding door panels (at least 3.5 cm) so the door can still open and close smoothly.
Installation in short:
Removing the screens is just as easy. Store the sun screens clean and dry so they can easily be reinstalled next spring.
Sliding doors are often exposed to direct sunlight and therefore receive a lot of UV radiation. At Sun Eclipse, both the screen fabric and the vacuum suction cups are resistant to UV radiation and discolouration, keeping them looking good for years.
If your screen is installed on the outside, it may become dirty faster due to dust or rain. Thanks to the special coating, dirt hardly adheres to the screen, meaning you usually only need to clean it once per year. Use the special Sun Eclipse cleaner and a soft cloth to keep the screen, suction cups and glass in optimal condition.
After the warm season, simply remove the sun screens and store them clean and dry until next year.
This is why you choose Sun Eclipse:
Choose your screen type
Optimal View blocks up to 85% of heat while preserving your outdoor view. Maximum Sunblock blocks up to 97% but also reduces your view outside.
Choose your screen shape
In addition to classic rectangular or square windows, we also make screens for non-standard shapes such as triangles, trapezoids and circles.
Choose your screen colour
Not every colour suits every space. That’s why we offer a range of colours that easily complement any interior.
Install and enjoy
Simply place the screens on your windows in seconds and enjoy a comfortable and pleasantly cool living environment again.
1309 reviews in the last 12 months
97% recommends us
At Sun Eclipse, we continually strive to provide our customers with the best possible support. For this reason, we have collected and answered the most common questions in our FAQ. This way, you can easily find answers to all your questions.
Sun Eclipse screens and suction cups stay put even during a spring storm. Our screens catch little wind because they are close to the windows and the suction cups are designed to last.
The suction cups are a maximum of 100 cm apart. If your screen has a length and/or width that is larger, an extra suction cup is placed halfway so that the maximum distance between two suction cups, measured along one side, is never greater than 100 cm.
Sun Eclipse screens are made of sustainable material, last a long time and ensure lower energy consumption when using air conditioners. It is the simplest solution to indoor heat.
Because Sun Eclipse screens are placed 2 cm from the window’s surface, the screens are supplied with 1.5 cm excess fabric on each side (3 cm per width and height). As a result, the screens close properly and no heat and light can pass through the edges.
You can also opt for no excess fabric, for instance, if you have high square upright edges on your window frames. In this case, choose under ‘which type of frame do you have’ the option ‘Deep and angled’ when you order.
You can request any other changes in the order option. This way you can create a custom sunshade.
Sun Eclipse is an affordable indoor heat solution. That’s why we are online only. By letting the customer do the measuring and assembly, we keep costs, and therefore prices, low.
Use our online ordering tool and see the price immediately.
